Wife made a cool kitchen renovation for "three pennies": a cheap way to transform an outdated furniture set

Table of contents:

Wife made a cool kitchen renovation for "three pennies": a cheap way to transform an outdated furniture set
Wife made a cool kitchen renovation for "three pennies": a cheap way to transform an outdated furniture set
Anonim

It turns out that in order to update kitchen furniture, no special material costs are needed. If you want to make high-quality and original repairs, use the advice of my wife. You can wow your family and guests with a unique creative design.

Options for choosing a kitchen restoration method

Before you start repairing a kitchen set, you need to decide on the method of restoration. Therefore, pay attention to the following aspects:

  1. Practical. All materials that you will use must be moisture resistant and easy to clean. Do not forget that the kitchen is constantly present with fumes, grease, soot, etc.
  2. Style. Pay attention to your design or choose a new one. All items of the headset, colors and features of the renovation of the room should be in perfect harmony with each other.
  3. Budget. Carefully calculate how much money you plan to spend on repairs. Based on this, choose the most appropriate way.
  4. Assessing opportunities. Objectively evaluate your capabilities and choose the method that you can master. For example, painting facades with paint will be up to you, and decoupage with elements of aging may require additional effort.

Preparation for work

First of all, you need to get everything ready for work. Start by laying paper over all surfaces to keep floors, countertops, etc., from getting dirty. Then proceed directly to the preparation of the furniture set. To do this, follow these steps:

  1. Wash furniture inside and out with detergent.
  2. Remove all facades, and if necessary - cabinets, shelves, mezzanines.
  3. Remove all hardware and replace if necessary.
  4. Pay attention to the mounting mechanisms, some of them may also need to be replaced.

Don't forget to make a constellation plan. When you take it off, you can forget about what was where. Therefore, number each facade and each detail so that you can put everything in its place.

Image
Image

Fat Removal

Each item (first of all, we are talking about facades) should be rid of dirt and grease. You can use dishwashing detergent for this. But it is better if you purchase a special liquid or gel to thoroughly remove grease from surfaces. Work a few times to remove any residue, then wipe dry with a clean cloth.

Sanding

To get rid of old paint, you need to completely remove it with a grinder or sandpaper. Start with coarse-grained paper and then move on to fine-grained paper. You can also use a file and anything that is suitable for easy removal of the old coating. Try to do everything carefully so that the base itself is not damaged. After this treatment, surfaces should be as clean and smooth as possible.

Image
Image

Brazilian bikes 36km daily to take his beloved home

Image
Image

"Dad gets offended." Agata Muceniece about relations with Priluchny after a divorce

Image
Image

Money tree pleases with lush flowering: my secret is to care for the leaves

Image
Image

Primer coat

You must use a primer, otherwise the paint will quickly lose its attractive appearance. Therefore, the prepared surface must be well treated. This must be done in several steps. As a basis for applying paint, there are many different primers, which are presented in a huge assortment in hardware stores. Choose one of them which suits you best. You can choose a quick-drying base, you can choose a quality oil base that will help hide small surface defects. The main thing is that the primer is compatible with the paint you intend to apply. Apply two or three layers and do not forget that each subsequent layer must be applied on top of the previously dried one.

Surface leveling

In the previous section, we considered options in which the facades had a relatively flat surface. And what to do if there are deformations on the frontal parts of the furniture? We are talking about significant and minor roughness, tubercles or depressions. If it is minor damage, after the first sanding and priming, repeat the sanding again and apply the primer again. When it dries, go over with sandpaper or a grinder again (this way you can also fight the bumps). If there are cracks or depressions, purchase a special filler and spread over all deformed places.

Image
Image

Women's Jeans: One Detail to Consider Before You Buy

Image
Image

Rare shot: Viktoria Isakova showed her grown daughter from Yuri Moroz (new photo)

Image
Image

"We are still friends": Derevianko commented on the breakup with his wife

Tools and materials for dyeing

You need to purchase a small roller and paint tray. You will be able to pour the paint into the tray, dip the roller there and remove the paint residue on the ribbed part of the container. When applied with a roller, the paint lays down more evenly than when applied with a brush. But you also have to buy a brush. The fact is that for a beginner, roller work cannot be one hundred percent effective, there will still be places that will be difficult to process in this way. And even the smallest areas can be painted with a brush.

Image
Image

The choice of paint depends on your taste and on the material from which your kitchen set is made. Read the specifications on the label and consult with the sellers, so the possibility of error will be minimal. Before use, the paint must be well stirred or even filtered, otherwise it may contain small lumps. If they hit the surface, you can't count on smoothness.

Coloring

In order to make your painting job as easy as possible, get screw tips on which you can put facades. Start painting the back of the door, leaving the perimeter edges unpainted. Then turn the facade over and place it on the tips, do the same with the front side. When both sides are dry, you can paint the edges in the same way (flipping to one side and the other). Don't worry about it becoming noticeable. When all the paint is dry, these joints will be completely invisible.

Image
Image

I lost weight: what did Sofia Tarasova sacrifice for the sake of VIA Gra (new photos)

Image
Image

It is useful to wash often: myths about shampoo and hair care that only harm

Image
Image

If there is little snow, then there will be no harvest: December 16 - Day of Ivan the Silent

Image
Image

Atomizer

A great way to lay an even layer on the surface is to work with a spray gun. It lays down so evenly that you can forget about the problems with imprints of strokes with a brush or roller. But in this case, be careful, because the sprayer must be able to use. With inept use, you run the risk of painting over not only the doors of your kitchen furniture, but also all items in the kitchen, including walls.

Self-adhesive film

This is a great way to decorate your furniture with an original pattern. Today, the assortment of stores has a huge selection of films, the design of which is similar to the structure of wood, stone, has patterns, is monophonic, etc.e. You need to measure the area of all surfaces and buy the required amount of film. It should be glued after you remove the old paint and treat the surface with sandpaper or a grinder. Then take the cut piece of the film and carefully stick it, freeing it from the protective layer. If an air bubble forms, you can poke it with a needle or peel off the tape and stick it again.

The highest quality film is vinyl-based, because it does not fade, washes well, is resistant to mechanical damage and is not afraid of moisture. The disadvantage of this method is the fragility. Anyway, the edges will peel off over time, no matter how well you stick them.

Recommended: